Tilton Overhung – Aluminum & Steel (98-1201) Manuel d'utilisateur télécharger pdf

Description

The Tilton Overhung pedal assembly has been designed to provide the driver with

the greatest control and comfort from a swing-style pedal assembly. This system al-

lows the mounting of the master cylinders and reservoirs in the driver’s compartment

away from the heat of the engine.

Finite Element optimized pedals provide strength, stiness, and durability to handle

the most severe braking conditions. Adjustable foot pad positioning allows custom-

ization for dierent drivers.

The pedal assembly is set up for dual brake master cylinders and includes the balance

bar assembly. This allows adjustment of the brake pedal force distribution between

the two master cylinders. This system can be used to compensate for fuel load

changes, tire wear, and changing track conditions.

The Remote Brake Bias Adjuster is available as an option. This connects to the balance

bar allowing the driver to make balance bar adjustments quickly while on track.

Fluid reservoirs can be directly mounted to the master cylinders or can be remotely

mounted based on your application. It is important to follow these setup instructions

closely to realize the benets of this design.

installation notes

• The pedal assembly must be attached to a very rigid frame structure.

• The mounting location should suit the driver and also provide a stable

platform.

• Be sure that there is no binding during the full stroke of the master cylin-

ders when the pedal is depressed.

• The balance bar mechanism must clear all obstructions when the balance

bar is adjusted to the extreme right or left-of-center and at full stroke of

the master cylinders.

• If you have decided to remotely mount the reservoirs, select the location

for the reservoirs before starting installation.

• This is a gravity fed system, so the reservoirs must be located above the

master cylinders.

• Attention must be paid to the routing and location of the hydraulic lines.

Avoid heat sources such as exhaust pipes.

• Accurate clutch pedal setup is critically important. Improper clutch pedal

installation and/or adjustment can result in expensive clutch damage

and DNFs at the track!

Master cylinders sold separately

Diagram 1

Master cylinders sold separately

Steel

Aluminum

600 Series Overhung-mount Pedal Assemblies

INSTALLATION INSTRUCTIONS

98-1201

1 2 3 4

Résumé du contenu

Page 1 - INSTALLATION INSTRUCTIONS

DescriptionThe Tilton Overhung pedal assembly has been designed to provide the driver with the greatest control and comfort from a swing-style pedal a

Page 2 - Diagram 2

installation1. Set the clevis center-to center distance at 2.620 +/- .040". You need to do this before attaching the master cylinders.2. Thread t

Page 3 - FIREWALL

FIREWALLBA.25"Diagram 4clutch peDal setup 1. Install the clutch master cylinder using the supplied 5/16"-24 serrated ange nuts. Make sure t

Page 4

Balance Bar aDjustMent anD operationWhen running on pavement, you want the front tires to lock-up with slightly less pedal force than the rear tires.

Commentaires sur ces manuels

Pas de commentaire

Tilton Overhung – Aluminum & Steel (98-1201) Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Tilton Overhung – Aluminum & Steel (98-1201). Tilton Overhung – Aluminum & Steel (98-1201) User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Tilton Overhung – Aluminum & Steel (98-1201)